- Home
- HDPE Pipes
- HDPE Plain Pipes
- IS:14151 Part 1
PIAL's Plain Pipes IS:14151 Part 1 are corrosion resistant to a very wide range of substances and do not impart taste or odor to the water.
GET IN TOUCH- Applications
- Key Features
- Technical Specifications
- Water supply in urban and rural areas
- Irrigation water supply, permanent and portable
- Drainage, sewage and effluent conveyance
- Conveyance of chemical and industrial effluent and waste
- Saline water conveyance
- Bio-gas, coal gas & natural gas distribution line
- Compressed air line
- Sand stowing in mining
- Telecommunication and electrical cable ducting
- Connections to submersible pumps in wells and boreholes
- Undersea, underwater pipelines
- Strength - capable of absorbing shock and over-pressurization loads
- Ductility - flexing rather than cracking and failing
- Corrosion resistant - to a very wide range of substances
- Flexible - reduces number of fittings
- Resistance to ageing - UV resistant when exposed to sunlight
- Neutral - does not impart taste or odour to water, inert in many fluids
- Low friction loss - reduced pumping cost, higher flow
- Lightweight - compared to metal pipes
- Easily welded - secure jointing almost anywhere
- Resistance to scaling - highly resistant to scaling and biological build-up
- Virtually maintenance free - cost saving
- Very long life - best total cost value
| Material grade | Nominal pressure (kg/cm2, bar) | Nominal diameter (mm) |
|---|---|---|
| PE - 63 | 2.5 – Class-1 | From 75 to 180 |
| 3.2 – Class-2 | From 63 to 180 | |
| 4 – Class-3 | From 50 to 180 | |
| 6 – Class-4 | From 40 to 180 |